FPT’s Stage 5 marine engine completes IWV line-up

By Roberta Prandi21 April 2021

New C90 engine for inland waterway applications, compliant with Stage 5 emissions regulations and with 125 kW power output

The new C90 170 Stage 5 engine completes FPT Industrial’s offering for the most stringent Inland Waterway Vessels (IWV) Stage 5 emissions standard in Europe, with three engines at the same power output (125 kW/170 hp): N40 170, N67 170, and C90 170.

The new C90 170 marine engine by FPT Industrial The new C90 170 by FPT Industrial for Inland Waterway Vessels Stage 5 emissions regulations

But why three engines at the same power level? Guglielmo Tummarello, FPT Industrial’s Marine Market Segment director, explained that the choice for the 170 hp/125 kW power mark was dictated by the limit set with the IWV Stage 5 emissions regulations. Above that power mark, requirements are different.

Thus, the introduction of three engines with the same power output but different displacements and torque outputs and no urea-based aftertreatment systems, to cater to the needs of all possible customers/users.

All engines are based on existing FPT engines and have been optimized for inland waterway applications, basically acting on the fuel map and on a specific dataset for Stage 5 operation in the engine control unit. The C90 170 unit also includes an optimization of the turbocharger.

The N40 170 is a 3.9-L displacement engine that reaches 170hp/125 kW output at 2800 r/min. It delivers 560 Nm torque at 1800 r/min and according to Tummarello, it is a perfect fit for smaller boats.

The N67 170 has 6.7-L displacement and reaches over 800 Nm torque at 1300 r/min. It is a development from the N67 450 N marine engine for the USA emissions regulations: a flexible and performing unit that is appreciated for light- and medium-duty commercial applications. It features an enhanced cooling system and improved injection at cold temperatures.

Finally, the C90 170 has 8.7-L displacement and reaches over 1100 Nm torque already at 1000 r/min. “This engine in operation has an idle speed around 600/650 r/min, so it is pretty clear that it reaches its maximum torque almost immediately,” said Tummarello. “It is a solution for boats with larger displacements and a very reliable unit for medium- and heavy-duty use.”

As already mentioned, the C90’s fuel map was optimized and a specific turbocharger was adopted to be able to guarantee the torque output.

Some changes were introduced also in the valve lubrication circuit that utilizes an oil retention system to minimize fuel leakages in the combustion chamber and reduce the emission of visible smoke from the exhaust pipe. “Although this was not prescribed in the IWV Stage 5 regulations, the reduction of smoke emitted is a major benefit for boats used on rivers or along coasts, often in the vicinity of urban and densely-populated areas or in environmental-sensitive locations.

Another important aspect of the three new engines for inland waterway applications in that all will be available also for keel cooling option (besides the traditional cooling with heat exchanger and sea-water circuit).

Tummarello explained that FPT’s engineering worked with the existing sea-water cooling system in terms of material and structure. Since this was already a circuit well protected from corrosion, the keel cooling variant makes it possible to reduce the content of anti-corrosion media in the coolant, to optimize heat dissipation and allow the customer to use less coolant for an even more environmentally sustainable operation and lower maintenance costs.

For FPT Industrial the keel cooling solution is quite a new segment that the company will target for inland waterway applications in Europe and shallow-water operation in the USA.

In China, emissions standards for inland waterways GB15097 already regulate Step 2 (also known as China 2) which will come into force July 1, 2021. For the Chinese market, FPT Industrial through its distributors already offers engines certified for China 2, namely types NEF67, C9 380, C9 620, C16 600 and C16 1000.

FPT Industrial’s marine engine range is composed of eight engine families, from 85 to 1000 hp (62 to 735 kW). All marine engines by FPT Industrial are covered by the MyFPT app for remote monitoring and service that was very recently upgraded and officially presented. Read more in dieselprogress.com

MAGAZINES
NEWSLETTER
Delivered directly to your inbox, Diesel News Network newsletter features the pick of the breaking news stories, product launches, show reports and more from KHL's world-class editorial team.
CONNECT WITH THE TEAM
Mike Brezonick VP, Power Division Tel: +1 262 754 4112 E-mail: mike.brezonick@khl.com
Alister Williams VP Sales Tel: +1 843 637 4127 E-mail: alister.williams@khl.com
CONNECT WITH SOCIAL MEDIA
Latest News
Omni’s new electric drive for axles
Unit combines gearbox and electric motor for terminal tractors, vehicles and railcar movers
Caterpillar surpasses 3 billion tonnes hauled autonomously
Cat Command for Hauling used in wide range commodities across growing number of haul truck class sizes.
Skyjack reports strong Q1 results
North American market up 7.7 percent for Skyjack in Q1 and parent company Linamar expects 20 percent full-year growth for the access OEM